Browse Our Online Inventory: Check Availability, View Pricing, Order Parts
TTI has steadily grown to become the world’s leading passive and connector specialist in the electronic component industry. TTI maintains an extensive inventory and offers the best interconnect choices in the industry, meeting almost any requirement of our customers. The company’s basic strategy is to focus on a specific range of products and strive to be the industry’s leading distributor. No other company offers the unique combination of benefits that TTI provides. We maintain an extensive inventory of circular connectors, automotive connectors, backplane connectors, D-sub connectors and terminal blocks from the industry's finest manufacturers.
The team of specialists at TTI has more experience in interconnect product areas than any other distributor. All TTI employees participate in company-wide training programs, which have helped create the most product-knowledgeable team in the industry. Additionally, customers can rely upon the TTI sales team as a valuable resource of information and guidance.
Featured Interconnect Products
Cable Cat 5e is designed for fixed or portable applications in harsh environments and can be ordered in standard or custom pre-terminated patchcord lengths or as unterminated 100m and 300m bulk spools.
Amphenol Cat 5e and Cat 6 Modular Jacks are designed for applications that require higher standards for data transmission. Our Cat 5e products can reliably work at 1000Mbps (Gigabit Ethernet) speeds while controlling near end cross talk. Our Cat 6 products are ideal for supporting 10 Gigabit Ethernet and are able to operate up to 250MHz. With our existing and upcoming lines of high performance Modular Jacks, Amphenol is ready to meet your Cat 5e and Cat 6 performance RJ requirements.
Souriau UTL Series Circular Lighting Connectors are reliable, sealed plastic connectors able to carry up to 16A 277V, and designed to respect modern safety standards.
The AFK series covers the range of 1.5mm, 2.8mm and 4.8/6.3mm terminals and is suitable for a wide range of automotive applications.
// Posted by:
Ronald E. Bishop
Bishop & Associates reports on the facts and figures of the connector industry’s largest market sector -automotive. Keep reading...
// Posted by:
Ronald E. Bishop
In 2013, Europe accounted for 21.8% or $10,643 million of total world connector demand. This was an increase of 7.3% over 2012, when Europe accounted for $9.916 million. Keep reading...
// Posted by:
Ronald E. Bishop
Bishop & Associates 2014 Connector Industry Forecast shows major changes in the marketplace, including stronger performance in the industrial, automotive, and telecom/datacom equipment sectors. Keep reading...
Interconnects are available at TTI Inc. from industry leading manufacturers. TTI is an authorized distributor for many connector manufacturers including: 3M Electronic Solutions Division,
Amphenol Aerospace, Amphenol Industrial, Amphenol PCD,
FCI, Glenair, Molex, Phoenix Contact, TE Connectivity
and TE Connectivity / AMP.
consist of two mating halves or shells, each of which contains multiple pin or socket configurations. Internal insulating spacers, or inserts, support the contacts in their proper orientation. The plug end normally contains pin contacts and mates with the receptacle half, which normally contains the socket contacts. By nature of their shape and construction, circular connectors tend to be rugged and are generally used in hostile environments.
Circular Connectors - 38999
(a type of circular connector) is one of the most popular connector series for modern military applications, and it is becoming more prevalent in high tech commercial applications such as telecommunications base stations.
(D-subs) have rectangular shells with D-shaped mating faces. Plug connectors hold pin contacts while receptacle connectors hold socket contacts. The mating face provides polarization to prevent mismating, while the shell of the connector provides rugged protection for otherwise exposed pin contacts. D-subs connect the electronics' inside equipment to the "outside world" either directly, by mounting to the PC board, or indirectly, by means of jumper wires.
Ethernet & Modular Connectors
are found in nearly all industries where small pin count connections (generally 8 or less) are needed. They are most widely used in telecommunications applications with the most obvious example being their use in modular telephones to connect cords, handsets, etc. Crimp, solder, and insulation displacement are the most common methods of termination for these devices.
IC & Component Sockets
are used to transmit signals from point to point with minimal energy loss while reducing noise. They can be used for DC and audio frequency signals when effective shielding is desired and are used to transmit radio frequency energy up to 18 billion cycles per second. Used on signal carrying systems such as audio, data communications and CATV systems, coaxial connectors come in hundreds of sizes and shapes designed to meet performance requirements for both military and commercial markets. There are four basic types of RF connectors: plug, receptacle, jack and adapter. Although there are many different styles of RF connectors, most of them are used to terminate a single coax cable and have a center contact, an insulator and a shell.
consist of one or more electrical terminals mounted on a solid insulation material. Each is used to terminate a discrete wire or wires. The most common are screw-type with each screw or pair of screws isolated from the next. Terminations involve either connecting power wires to a system or connecting signal or sensor wires to a computer, telephone system, or control system. The barrier blocks are usually positioned just outside the protective cover of the system for ease in hookup. The primary function is to protect against shorting.
and splices are used in almost every electronic application. They are used anywhere a discrete wire needs to be spliced, terminated or attached to a terminal block or post. Terminals and Splices come in various styles and are available with insulated and uninsulated barrels. Two other important characteristics to consider are the wire range the terminal or splice will accept, and the stud size that the terminals will be used on.
Things to Consider
- Resistance: Critical if connectors are in series and the impedances are low.
- Maximum current & voltage: Influenced by the connector, the size of conductors connected to it and the number of circuits passing the current.
- Intercontact capacitance: Important at all frequencies but becomes more important at higher frequencies because of its effect on delay, crosstalk and the impedance of a circuit.
- Mounting: Includes the appropriate shape of the connector for the application, the dimensional tolerances, the accessibility of the connector location, the protection required of the shell and contacts, and assembly format (thru-hole vs. surface mount). It also includes consideration of the hardware required to mount the connector.
- Wire termination: Involves specifying the appropriate contact type used, the termination technique most efficient for the wire used, and the number of connections made.
- Connector mating: Several factors are involved here...frequency of mating, the need for polarity and other mating alignment features for contacts and shells, the need for quick connect and disconnect, contact insertion/extraction force requirement levels, the need to protect against excessive vibration, and the support structures needed for the cable assembly.
- Environmental conditions: Included in this category are temperature extremes, humidity, salt spray, corrosion-causing chemicals, and contaminates. These environmental factors are determined by the location in which the equipment containing the connector must operate.